Chart Sizing in EdgeProX

Chart Sizing

In EdgeProX you have the ability to manually change the sizing of any charts or to set a fixed size for each chart. 

1. The first way to change the sizing on your chart is manually. You will need to change the vertical axis then the horizontal axis.  Navigate to the vertical axis of your chart. There is a space in between the price axis and the chart where your mouse will change from a point to having two arrows pointing up and down. View image below for clarity: 
      
     

2.  Navigate to the horizontal axis of your chart. There is a space in between the time axis and the chart where your mouse will change from a point to having two arrows pointing left and right. View image below for clarity:     

        

3. You can also set your charts to have a fixed range between the horizontal and the vertical axis. This can be done by navigating to the, "Configure" tab > "Preferences." This will bring up a menu titled, "Preferences."
​
      

4. Next, go to the "Chart" tab. This is where you will see "Top Inset" and "Bottom Inset". Changing these will change the spacing from the top to the highest candle shown and It will also change the spacing from the lowest point on the chart to the lowest candle shown. 

NOTE: The change will not be immediate . You will need to open a new chart for the change to become visible. 

      
      

    • Related Articles

    • EdgeProX TPO Spacing

      When you first open up the TPO charts within EdgeProX, they may look like the image below. This is due to the spacing configuration within the TPO Setting. How to Properly Space your TPO Chart: 1. The first step is to click the cog icon that is next ...

    • How to Apply FT71's Chart Analysis to EdgeProX

      EdgeProX chart files by FuturesTrader71 can be accessed by members subscribed to the platform.  To download the chart files head over to the EC Subscription Portal.  The chart files and indicators are available to download in "Special Downloads."  If ...

    • Retrieving Missing Chart Data in EdgeProX

      This article is to help resolve commonly occurring issues during the rollover period. i.e., Missing Chart Data.  Whether you are using 'Continuous Futures Contract Symbol'  e.g., @ES, or using 'Specific Contract Symbol' e.g., ESM2.  If your charts ...

    • Adding a Bar Countdown to a Chart on EdgeProX

      A bar countdown is used for to measure how much time is left in a bar. To add a bar counter to a chart, right-click on the chart and select "Chart Settings" and select "Labels". Find "Bar Countdown" on the "Available Labels" column, and press the > ...

    • How to Save your Chart Analysis

      To save your chart analysis, please click "File" > "Chart" > "Save As" as in the image below: